10
Programming and Configuration Manual
3.1 ACTIVATE OUTPUTS
Activate the ACTIVATE OUTPUTS menu.
The display will now show the functions that can be activated:
• FAN MOTOR
• DRUM MOTOR CW
• DRUM MOTOR CCW
• HEATING 1
• HEATING 2
• GAS ERROR RESET
• SLOT BLOCKING
• PROGRAM RUN
• CONDENSER PUMP
• EXT SIGNAL
• DRIER INTERLOCK (used on machines with MCU)
• EXTERNAL BUZZER
• FLASH LIGHT
• INTERNAL BUZZER
• MCU FAN
Make the selected function active or inactive by pressing the control knob.
■ (or values) = Active
□ = Inactive
X = Not available on the machine
Z = The machine is prepared for the function on an extra I/O board but not activated
To Next Page