36
Programming and Configuration Manual
5.5 PRICE/PROGRAM
Activate the PRICE/PROGRAM menu.
The display will now show the programs that can be programmed with a price.
• NORMAL
• LOW
• NO HEATING
Set the price for each program.
5.6 PRICE/OPTION
Activate the PRICE/OPTION menu.
The display will now show the options that can be programmed with a price.
• EXTRA DRY
• DRY
• IRON DRY
Set the price for each option.
+ = The price will increase with the set value (for example the option EXTRA DRY)
- = The price will decrease with the set value (for example the option DRY)
0 = No affect on the price.
5.7 PRICE/TRIANGLE OPT.
Activate the PRICE/TRIANGLE OPT. menu.
The display will now show the options that can be programmed with a price.
• ECO PROGRAM
• QUICK PROGRAM
• CARE PROGRAM
Set the price for each option.
5.8 TIME PER COIN
Set the time for each coin.
The time is set in hours, minutes and seconds.
The pre-set value is 10 minutes.
5.9 PRICE REDUCTION
Set the requested price reduction in % of the set price.
The set price reduction is now valid for all programs and options.
Only available if activated on I/O module type 2.
5.10 PRICE REDUCTION SCOPE
Set if the price reduction, set in PRICE REDUCTION, shall apply to “Total price” or “Program price”.
TOTAL PRICE = Program and options
PROGRAM PRICE = Program only
Turn the control knob to switch between TOTAL PRICE and PROGRAM PRICE.
5.11 COIN COUNTER 1
This menu shows the total number of coins inserted in coin slot 1.
Resettable.
5.12 COIN COUNTER 2
This menu shows the total number of coins inserted in coin slot 2.
Resettable.
To Next Page
Loading...
