48
Programming and Configuration Manual
OUTLET AIR TEMP.
Adjust the outlet air temperature.
COOLING TIME
Adjust the cooling time.
ANTICREASE PARAM.
• FAN ALWAYS OFF
FAN ALWAYS OFF
Adjust the fan settings in ANTI CREASE.
YES = Fan is always off
NO = Fan is always on (default setting)
7.3 CONFIG BUTTONS
Press the config button to be set up / changed on the machine. Note that not all of the buttons are allowed to be
changed.
Select function for the button from the list:
• QUICK SELECTION
• OPTION
• REMOVE BUTTON
• RESET BUTTONS
QUICK SELECTION
Select program, triangle (if possible — depending on software / machine type) and option for the quick selection but-
ton from the list on the display. Selected program and option will be pre selected when the quick selection button is
pressed in the user interface.
• SAVE
• PROGRAM
• TRIANGLE
• OPTIONS
The settings will be saved automatically when pressing the control knob again.
OPTION
Select option for the option button from the list on the display.
• SAVE
• OPTIONS
The settings will be saved automatically when pressing the control knob again.
REMOVE BUTTON
The settings will be removed and the button will be deactivated.
RESET BUTTONS
The settings for the button will be reset to factory settings.
To Next Page
Loading...
