Programming and Configuration Manual
21
4.7.1.17 SECOND LANGUAGE
Second language is only possible on some markets and segments.
Set the language to be shown as the second language.
The second language will be displayed in the user interface when machine is idle position and during running mode.
4.7.1.18 ALLOW LANGUAGE CHANGE
Set if language change is allowed or not in the user interface.
YES = Language change is allowed
NO = Language change is not allowed
4.7.1.19 LANGUAGE TIMEOUT
Set the time after which an unused machine should return to the default language and return to the program
selection.
The time can be set in minutes and seconds.
The pre-set value is 2 minutes.
4.7.1.20 AUTO START PAID
Set if a selected program in user interface shall start as soon as full price is paid for and the door is closed in a coin
operated machine.
YES = Active
NO = Not active
4.7.1.21 BLOCK START ACTIVE
Set if it shall be possible to block the start of a program with the control knob via a separate input. (Function used by
external booking systems).
YES = Active
NO = Not active
4.7.1.22 BUTTON CLICK
Set if the machine shall give a sound for each new position when the buttons on the control panel/control knob is
pressed/turned or not.
YES = Sound
NO = No sound
4.7.1.23 PAUSE PROGRAM BUZZER
Set the time that the buzzer shall beep when a program has paused (unless the pause is interrupted manually by the
user).
The time can be set in minutes and seconds.
The pre-set value is 10 seconds.
0 = No beep
4.7.1.24 PROGRAM END BUZZER
Set the time that the buzzer shall beep when a program has ended.
The time can be set in hours, minutes and seconds.
The pre-set value is 10 seconds.
0 = No beep
4.7.1.25 COIN 1
Set the value for coin slot 1. (If the coin value is set to more than 0, the machine is treated as a coin operated
machine).
Example: If the value is set to 10 the coin value will be displayed as 10 (if the DECIMAL IN PRICE is set to NO) or
00,10 (if the DECIMAL IN PRICE is set to YES).
To Next Page
Loading...
