14
C TECHNICAL DATA
C.1 Dataplate position
IMPORTANT
This instruction manual contains information relevant to various appliances.
See the dataplate located under the control panel to identify the appliance (see picture).
IMPORTANT
When installing the appliance, make sure the electrical connection is carried out in compliance with that specified on the
data plate.
C.2 Appliance and manufacturer's identification data
An example of the marking or dataplate on the machine is given below:
GAS appliances
The dataplate gives the product identification and technical data. The meaning of the various information given on it is listed below:
F.Mod. factory description of product
Comm.Model commercial description
PNC production number code
Ser.No. serial number
Type family type
El power supply voltage + phase
Hz power supply frequency
kW max. power input
A absorbed current
Power unit El.
power
CE CE marking
AB gas safety certificate number
N certification group
0051 notified body
EN 203–1 EU standard
To Next Page
Loading...
