65
ENGLISH
A.1 General information
Thank you for choosing a quality product. We are sure
our Prostore refrigerator will meet all your needs for
proper keeping of food.
A.1.1 General safety instructions
To ensure safe use of the machine and a proper understand-
ing of the manual it is necessary to be familiar with the terms
and typographical conventions used in the documentation.
The following symbols are used in the manual to indicate
and identify the various types of hazards:
ATTENTION
Danger for the health and
safety of operators.
WARNING
Danger of electrocution -
dangerous voltage.
Words further explaining the type of hazard are placed
next to the symbols in the text. Warnings serve to ensure
the safety of personnel.
A.1.2 Additional indications
In this manual the risks arising from incorrect use will be
marked with:
ATTENTION
Risk of damage to the machine or the product.
The parts of the text preceded by the following symbol:
NOTE
Clarications and explanations
provide recommendations to keep in mind during the entire
life-cycle of the product.
The drawings and diagrams given in the manual are not
in scale. They supplement the written information with an
outline, but are not intended to be a detailed representation
of the machine supplied.
The numerical values given on the machine installation
diagrams refer to measurements in mm.
A.1.3 Introduction
Given below is some information regarding the machine's in-
tended use, its testing, and a description of the symbols used
(that identify the type of warning), the denitions of terms used
in the manual and useful information for the appliance user.
A.1.4 New appliance concept
The cupboard line has been created according to a new
system that optimises performance and reduces energy con-
sumption, also taking into account space requirements and
environmental impact. Given below are the main features of
this new system:
the door frame allows the side walls to be completely
lled with foam insulation, whereas the inside part has
been created in such a way as to increase the insulation.
the ball-shaped door seal with three chambers has a
double insulation area that reduces condensation and
consumption.
all the internal components (e.g. rear supports) are re-
movable.
the appliance has a conveyor that distributes the internal
air ow uniformly, thereby allowing a uniform tempera-
ture to be maintained even when there is an excessive
product load.
the position of the compressor facilitates charging with
gas.
there can be various types of refrigerant gas:
R134a
R404A
R290.
A.1.5 Easy cleaning
The cupboard line is easy to clean thanks to the rounded corners
and the possibility of removing all the internal components.
A.1.6 Recyclability and environmental impact
The appliances have been designed also taking environmen-
tal impact into account, and therefore the following have
been used:
cyclopentane for the foaming, which oers better in-
sulation and is 100% “environmentally friendly” (good
environmental impact);
the refrigerating units use an HFC (R134a/R404a) or HC
(R290) refrigerant uid allowed by the current regulations.
the refrigerating unit can be removed in one piece;
the parts of the appliance are made from recyclable
material.
A.1.7 Intended use and restrictions
Our appliances are designed and optimised in order to obtain
high performance and eciency. This appliance is designed
for the refrigeration and preservation of foods.
Any other use is deemed improper. The appliance must not
be used by people (including children) with limited physical,
sensory or mental abilities or without experience and knowl-
edge of it, unless instructed in its use by those responsible
for their safety.
To Next Page
Loading...
