Electrolux Prostore PS06R1F - Fitting Anti-Tipping Cables on the Appliance

73
ENGLISH
B.2.5 Fitting anti-tipping cables on the appliance
When installing the appliance, make sure to x the anti-tipping
cables to it. To t, proceed as follows:
600mm models

undo the two hex screws positioned on the roof of the
machine, as shown in the gure, and remove the cables
from their packing:

join a slot of the cable to the hex screw, as shown in
the gure:
1
3

retighten the screw complete with the cable on the roof
of the appliance.

the cable, must then be xed to the wall using a plug,
topermanently secure the appliance.

Repeat the same operation also with the other cable.