Electrolux W3 SERIES User Manual

10
Procedure for use
If you have entered the wrong number
Enter the correct number to overstrike the earlier
one.
3581
If you have a memory card
in the program control unit,
and the program you selec-
ted is both on the memory
card and in the PCU, you will
be asked ”FROM CLS OR
SMC?”.
Press CLS if you want to
take the program from the
PCU.
Press SMC if you want to
take the program from the
memory card.
In some of the text shown on
the display, Clarus Control
is referred to as CLS and the
memory card is referred to
as SMC.
Memory cards
A memory card is a plastic card, the size of a credit
card, with an electronic memory chip inside it. This
card is capable of storing 10 to 15 wash programs
of normal size. If the programs are mostly small
ones, more of them can be stored, whereas larger
programs will reduce the number which can be
held by the card. Memory cards of this type can be
used to:
• transferwashprogramsfromonemachineto
another
• runwashprogramsstraightfromthecard
• transferwashprogramsfromaPCtoamemory
card and from a memory card to a PC (these
procedures, and how to write a wash program
on a PC, are described elsewhere).
Memory cards are described in detail in the section
”Memory card”.
4031
Here you can select programs from
the program libraries. See the section
entitled ”To start a wash program
from the program library”.
Displayed here will be the number of
the most frequently used program.
Press this key if you want to select
this program.
Use the numeric keys to
enter the program number
Press SELECT.
RUN A WASH PROGRAM
ENTER A PROGRAM NUMBER:
SELECT FROM LIBRARY
SELECT
991
for example:991
CLS SMC 991
RUN A WASH PROGRAM
ENTER A PROGRAM NUMBER:
FROM CLS OR SMC?
991
CLS SMC SELECT
CLS
SMC

Electrolux W3 SERIES Specifications

General

Brand	Electrolux
Model	W3 SERIES
Category	Washer
Language	English