30
Procedure for use
Manual mode
Manual operating when no program is running
3589
If this menu is not currently
displayed:
Press a repeatedly.
Press b to highlight
”OPTIONS MENU”.
Press SELECT.
Always lock the door first!
You must always close and lock the door first be-
fore you can operate the machine manually.
To lock the door, use the submenu MOTOR/DOOR,
see section ”Motor/door”.
All manual settings are cancelled when you
exit manual operation
All manual settings (such as door, motor, tempe-
rature, and drain) will be cancelled when you exit
manual operation.
The door is unlocked, the motor stops, the drain
opens, heating is halted, and the temperature is
reset to zero.
Press SELECT.
Press b six times...
....to highlight ”MANUAL
MODE”.
Two types of manual operation
There are two types of manual operation, which
should not be confused:
• Manualoperationwhennoprogramis
running
These functions are described in this section.
• Manualoperationduringaprogram
These functions are described in section
”Manual functions”.
3685
SELECT
RUN A WASH PROGRAM
OPTIONS MENU
MAKE YOUR CHOICE WITH
cOR bAND PRESS SELECT
RUN A WASH PROGRAM
OPTIONS MENU
SELECT
WASH PROGRAM LIBRARY
PROGRAMMING MODE
SETTINGS 1
MEMORY CARD
SERVICEMODE
STATISTICS
MANUAL MODE
SETTINGS 2
EXIT
SELECT
MENU
MAKE A CHOICE:
WASH PROGRAM LIBRARY
PROGRAMMING MODE
SETTINGS 1
MEMORY CARD
SERVICEMODE
STATISTICS
SELECT