Electrolux W3 SERIES - Service Information - Fault Tracing

67
Maintenance
Service information - Fault tracing
If the machine fails to start, check to ensure that:
 • itisturnedonatthemains.
 • themanualshut-offvalvesareopen.
 • aprogrammehasbeenselected.
 • ifitisacoin-operatedmachine,thatthecorrectamountofcoinsor 
tokens have been inserted.
 • thedrumdoorislocked
On machines built for washing mops, it can be caused by too low a level in
the program stage. The lowest level for a mop program in the main wash
with heating is 22 scale units.