Electrolux W3 SERIES - Pause

25
Procedure for use
Pause
During program operation the
display will look like this (see
section ”To start the wash
program”).
Two ways of pausing during a wash program
Note that you must be in normal wash mode to be
able to pause in this way. If, for example, you are
using ”Manual Functions”, you will have to exit that
first before you can use Pause.
There are two ways of pausing during a wash
program:
1 As an additional function. This is described in
this section.
2 By pressing a.
Press START to restart the
wash program.
3588
Press c or bone or
more times to highlight
”PAUSE”.
Press SELECT.
When the machine pauses:
• Programoperationishalted.
• Fillingishalted(whereapplicable).
• Heatingishalted(whereapplicable).
• Themotorstops.
• Thedrainvalveremainsclosed.
• Thedoorcannotbeopened.
3583
991 NORMAL 95°C
PROGRAM STEP: MAIN WASH 1
STEP TIME: 720 SEC
SET TEMPERATURE: 85 C
ACTUAL TEMPERATURE: 21 C
REMAINING TIME: 70 MIN
DRUM SPEED: 1000 RPM
PAUSE
SELECT
PAUSE
SELECT
991 NORMAL 95°C
MAIN WASH 1
PAUSE
START
START