24
Procedure for use
Detergent/flush
Use b and c to select
the function you require.
To access this function, see
instructions in section ”Ma-
nual functions”.
Detergent signals and water flushing
FLUSH WATER:
This function uses water to clear detergent from
the supply tubes of the detergent dispensing
system.
POWDER SIGNAL:
This function will either: a) use water to dispense
detergent from machine compartments, or: b)
dispense detergent from an external system. The
number of valves present will vary according to
the machine type.
3684
When you have finished:
Press b repeatedly to
highlight ”EXIT”.
Press OPEN.
The function will be activated
for as long as you press and
hold this key. The function
ceases as soon as you re-
lease the key.
Press SELECT.
OPEN
FLUSH WATER
POWDER SIGNAL 1
POWDER SIGNAL 2
POWDER SIGNAL 3
POWDER SIGNAL 4
POWDER SIGNAL 5
LIQUID SIGNAL 1
LIQUID SIGNAL 2
LIQUID SIGNAL 3
LIQUID SIGNAL 4
LIQUID SIGNAL 5
LIQUID SIGNAL 6
LIQUID SIGNAL 7
LIQUID SIGNAL 8
EXIT
OPEN
SELECT
MANUAL FUNCTIONS
DETERGENT/FLUSH
FLUSH WATER
POWDER SIGNAL 1
POWDER SIGNAL 2
POWDER SIGNAL 3
POWDER SIGNAL 4
POWDER SIGNAL 5
FLUSH WATER
POWDER SIGNAL 1
POWDER SIGNAL 2
POWDER SIGNAL 3
POWDER SIGNAL 4
POWDER SIGNAL 5
LIQUID SIGNAL 1
LIQUID SIGNAL 2
LIQUID SIGNAL 3
LIQUID SIGNAL 4
LIQUID SIGNAL 5
LIQUID SIGNAL 6
LIQUID SIGNAL 7
LIQUID SIGNAL 8
EXIT
Note!
For this function, all of the menus will not be
available on machines with one I/O board.
To Next Page
Loading...
Need help?
General
