Electrolux W3 SERIES User Manual

16
Procedure for use
Press c one or more
times...
...to highlight the line re-
quired.
3584
To change parameters in the current program step
During program operation the
display will look like this (see
section ”To start the wash
program”).
Use the numeric keys to
enter the new parameter .
Press SELECT.
If you have entered the wrong parameter
Continue pressing numeric keys to overstrike the
incorrect parameter.
Note: always use the same number of digits as
used on the display to overstrike the incorrect
parameter.
Example:
To change the time for the program step to 30 se-
conds, enter 030 to overstrike the earlier parameter.
Press SELECT.
You can alter the following program steps:
Prewash, Main wash, Rinse, Drain, Soak
Length of program step (max. 9998 seconds),
heating temperature (max. 97°C).
Extraction
Length of program step (max. 3599 seconds),
extraction speed.
991 NORMAL 95°C
PROGRAM STEP: MAIN WASH 1
STEP TIME: 720 SEC
SET TEMPERATURE: 85 C
ACTUAL TEMPERATURE: 21 C
REMAINING TIME: 70 MIN
DRUM SPEED: 1000 RPM
RAPID ADVANCE
SHOW WEIGHT
SELECT
SELECT
SELECT
991 NORMAL 95°C
PROGRAM STEP: MAIN WASH 1
STEP TIME: 720 SEC
SET TEMPERATURE: 85 C
ACTUAL TEMPERATURE: 21 C
REMAINING TIME: 70 MIN
DRUM SPEED: 1000 RPM
RAPIDADVANDE
SHOW WEIGHT
SELECT

Electrolux W3 SERIES Specifications

General

Brand	Electrolux
Model	W3 SERIES
Category	Washer
Language	English