27
Procedure for use
Select new wash program
During program operation the
display will look like this (see
section ”To start the wash
program”.
Press c or b one or
more times to highlight
”SELECT NEW WASH PRO-
GRAM”.
Press SELECT.
Automatic return to normal display
If no keys are pressed within 20 seconds, the
display will revert automatically to its previous ap-
pearance.
Press b one or more
times as required...
...to highlight the new wash
program.
Press SELECT.
The existing wash program
will now be interrupted and
the new one will begin.
To change the wash program after program
operation has commenced
You can change to a different wash program at any
time during program operation. When you do, the
current function (for example, rinse) will be inter-
rupted. The new program will start immediately
after that (from the beginning).
This function is useful, for example, if you discover
that you have started the wrong program.
3583
991 NORMAL 95°C
PROGRAM STEP: MAIN WASH 1
STEP TIME: 720 SEC
SET TEMPERATURE: 85 C
ACTUAL TEMPERATURE: 21 C
REMAINING TIME: 70 MIN
DRUM SPEED: 1000 RPM
SELECT NEW WASH PROGRAM
SELECT
SELECT NEW WASH PROGRAM
SELECT
3591
991 NORMAL 95°C
PR. NO NAME
991 NORMAL 95°C
992 NORMAL 60°C
993 NORMAL 40°C
994 INTENSIVE95°C
995 INTENSIVE60°C
996 PERM PRESS 60°C
997 PERM PRESS 40°C
998 DELICATE 30°C
999 EXTR. HIGH 5 MIN
991 NORMAL 95°C
992 NORMAL 60°C
993 NORMAL 40°C
994 INTENSIVE95°C
995 INTENSIVE60°C
996 PERM PRESS 60°C
997 PERM PRESS 40°C
998 DELICATE 30°C
999 EXTR. HIGH 5 MIN
SELECT
SELECT
To Next Page
Loading...
Need help?
General
