Electrolux W3 SERIES User Manual

39
Procedure for use
The service program may only be
used by authorised personnel, be-
cause most safety interlocks are
disabled.
4209
Press b..four times....
... to highlight "SERVICE
MODE".
Press SELECT
Press the button on the
CPU circuit board.
Now you can choose
either to clear/reset a
register or to adjust the
weighing equipment.
If you want to exit:
Press b repeatedly until
EXIT is highlighted.
4042
Press b to highlight
the option you want, then
press SELECT.
Press SELECT.
SERVICEPROGRAM
MAKE A CHOICE:WATER
SERVICE PROGRAM
CLEAR TRIP HOUR COUNTER
CLEARSERVICECOUNTER
CLEAR WASH PROGRAM COUNTER IN CLS
CLEAR WASH PROGRAM COUNTER IN SMC
SCALE ADJUSTMENTS
SELECT
SERVICEPROGRAM
CLEAR TRIP HOUR COUNTER
CLEARSERVICECOUNTER
CLEAR WASH PROGRAM COUNTER IN CLS
CLEAR WASH PROGRAM COUNTER IN SMC
SCALE ADJUSTMENTS
EXIT
SELECT
SELECT
3685
WASH PROGRAM LIBRARY
PROGRAMMING MODE
SETTINGS 1
MEMORY CARD
SERVICE MODE
STATISTICS
MANUAL MODE
SETTINGS 2
EXIT
SELECT
MENU
MAKE A CHOICE:
WASH PROGRAM LIBRARY
PROGRAMMING MODE
SETTINGS 1
MEMORY CARD
SERVICEMODE
STATISTICS
SELECT
PRESS BUTTON
ON CPU BOARD
EXIT
To prevent unauthorised or accidental use
Unauthorised or accidental use of the service
program is prevented by requiring the user to locate
and press the button on CPU board.
6675, 5227
1 2

Electrolux W3 SERIES Specifications

General

Brand	Electrolux
Model	W3 SERIES
Category	Washer
Language	English