Electrolux W3 SERIES - Page 46

46
Procedure for use
Tare scale
Press b twice to high-
light ”TARE SCALE”.
Press SELECT.
This screen shows that the
weighing equipment has
been tared successfully.
Press SELECT.
Tare scale
This function involves first loading the drum with,
for example, a container, then taring (resetting)
the weighing equipment so that the weight of the
container will not be included when calculating net
weight.
If your attempt to tare the weighing equipment fails
at this point, you will see an error message equiva-
lent to: “FAILED. PRESS SELECT” on the display.
For troubleshooting, see the section “Fault-finding,
weighing equipment” in the machine manual.
For machines with weighing equipment installed only!
4780
SERVICEPROGRAM
MAKE A CHOICE:
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SETTARETOACERTAINVALUE
READTAREVALUE
CALIBRATE THE SCALE
SELECT
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SETTARETOACERTAINVALUE
READTAREVALUE
CALIBRATE THE SCALE
ZERO CALIBRATION
READVERSIONNUMBER
EXIT
SELECT
SCALE ADJUSTMENTS
TARE SCALE
DONE! PRESS SELECT
SELECT
SELECT
3588