Elegoo Centauri Carbon - Page 11

óŢýýĽdşýŢÖŮğŅĽDĽŦŮŢųóŮğŅĽ
滺
5.Enter the initial self-check process. Vibrations and noises during
the self-check are normal.
滼
滼
7.Self- check completed. Click “Confirm” to proceed.
滻
6.Do not tap or shake the machine during the self-check process
to avoid error prompts.
Important note: If you have disassembled machine
components such as the nozzle assembly or build
platform, make sure to re-level the platform before
printing.