DISCLAIMER
This manual and its contents remain the sole property of ELIWELL CONTROLS SRL, and shall not be reproduced or
distributed without authorization.
Although great care has been exercised in the preparation of this document, ELIWELL CONTROLS SRL, its employees or
its vendors, cannot accept any liability whatsoever connected with its use.
ELIWELL CONTROLS SRL reserves the right to make any changes or improvements without prior notice.
TECHNICAL DATA
Mechanical Caracteristics
Front protection: IP65.
Housing: PC+ABS UL94 V-0 resin plastic casing, polycarbonate glass, thermoplastic resin keys.
Dimensions: front 74x32 mm, depth 59 mm. (excluding terminals).
Mounting: panel mounting with 71x29 mm (+0.2/-0.1 mm) drilling template.
Terminals: screw terminal for cable with a diameter of 2,5mm
2
Connectors: TTL for connection to Copy Card
Temperature: Operating: –5 … +55 °C - Storage: –30 … +85 °C
Humidity: Operating / Storage: 10…90 % RH (not condensing).
Electrical Caracteristics
Power Supply: 230Va (
+10% / -15%) 50/60 Hz Consumption: 3W max
Display Range: NTC: –50.0°C ... +110°C; PTC: -55.0°C ... +140°C (on display with 3 digit + sign)
Accuracy: Better than 0.5% of full-scale +1 digit.
Resolution: 0,1 °C.
Buzzer: YES (it depends from the model)
Analogue Input: ID961: 1 NTC (Default) / PTC input (programmable by parameter H00).
ID971 e ID974: 2 NTC (Default) / PTC input (programmable by parameter H00).
Digital Input: 1 voltage-free digital input
14
To Next Page
Loading...
Need help?
General
