15
English
BASIC
OPERATIONS
Connecting the video cable
①
Mo ve t h e sw it ch on th e s i d e pa ne l
according to the specification of the display
device.
P.10
②
Use the cable corresponding to the switch
position specified in
①
to connect the
document camera to the display device.
CAUTION
Before connecting the main unit to other devices, be sure to turn OFF the power for all of the devices.
Turning the power ON/OFF
• Press the [ ] on the operating panel or the [ ]
button on the remote control to turn the power ON.
(After the [
] Button flashes blue, it is illuminated a few
seconds later.)
•
Hold down
the [
] button on the operating panel or the
[
] button on the remote control for two seconds or
more to turn the power OFF.
(The LED around the [
] button is illuminated in red.)
• Do not operate this device while it is flashing.
N o t e
LED
To Next Page
Loading...
Need help?
General
