ELNA 6003 - Seam Allowance Lines; Quilt Guide

Seam Allowance Lines
The lines on the needle plate and bobbin cover plate help
you measure seam width.
* The number indicates the distance between the center
needle position P 3.5 and the seam allowance line.
millimeters
Lines on
needle plate | 15 4/8" | 5/8” | 6/8”
@ Center needle position
@® Edge of fabric
@ Needle plate guide lines
Quilt Guide
The quilt guide will help keep the stitching lines straight.
Loosen the quilt holding screw, slide the quilt guide in the
opening until the desired width is set and tighten the screw.
Sew; the quilt guide will lie over the previous row of
stitching.
® Quilt holding screw
@ Quilt guide
@® Hole
® Distance