ELNA 6003 - How to Program Decorative Stitches; Single Motifs; Combining Motifs

©
or
24 W7.0L0.4
“Hit OS TMS
Decorative Satin Stitches
Add a decorative accent to your sewing. Express your
creative talents by selecting stitches #20 through #30 or
#36,
@ 26: Diamond shape stitch
® F: Satin stitch foot
e Remember to use stabilizer appropriate to the fabric.
Scallop Edges
Some of the scallop motifs can be used to attractively
finish the edges of collars, pockets and placemats.
To edge a collar, place interfacing between upper and
under collar and sew the pattern on the seam line.
After sewing, trim fabric close to stitching taking care not to
cut the scallops.
@ 24: Scallop stitch or 20
@ F: Satin stitch foot
Applique
In this type of applique, raw edges are
You may need to set the foot pressure dial to 2.
To prepare the raw edge, first cut the applique design out
of paper.
Press a fusible webbing to the wrong side of the fabric,
then cut the fabric slightly larger than the paper pattern.
Fold the fabric under to match paper pattern size and press
only the edge to form a perfectly shaped design.
Press the applique in place and sew, guiding the slit on
Foot F next to the finished edge of the applique.
@ 14: Applique stitches @ Foot pressure dial (2)
® F: Satin stitch foot ® Slit
37