ELNA 6003 - Automatic Needle Threader

Automatic Needle Threader
@ Raise the needle to its highest position.
Lower the needle threader lever as far as it will go.
@
Turn
the
lever
in
the
direction
of
the
arrow
in
the
illustra-
tion,
then
insert
Hook
@
into
the
needle
eye.
Bring
the
thread
around
Guide
@
and
under
Hook
©.
© Turn the lever in the direction of the arrow in the
illustration, drawing the thread loop through the needle.
Release the lever and let the needle threader return to its
Original position.
Manually bring the thread through the needle eye by
pulling the thread loop to the back.
¢
The
needle
threader
can
be
used
with
#11
to
#16
size
needles.
Thread
weight
may
vary
from
30
to
100.
15