ELNA 6003 - Buttonholes; Buttonhole Variations; Classic Buttonhole; Keyhole Buttonhole

Buttonholes
Buttonhole Variations
All buttonholes should use interfacing suitable for the fabric
weight. This is especially important when sewing on stretch
fabrics.
@ Classic Buttonhole
For buttonholes on shirts and blouses.
® Keyhole Buttonhole
For buttonholes on jackets.
@ Stretch Buttonhole
For stretch fabrics.
Test sew the buttonhole on a sample swatch of the same
fabric. Include the interfacing and any seam allowances
that will be in the actual garment. This is very important to
ensure the buttonhole size and fabric are compatible.
e Classic Sensor Buttonhole or Stretch Sensor
Buttonhole
Attach the automatic buttonhole foot R. Make sure the
button opening is at the back of the foot when it ts
attached.
@ The size of the buttonhole is automatically set by
placing the button in the automatic buttonhole foot.
The button holder on the foot adjusts for a button up to
2.5 cm (1”) in diameter.
Alter the buttonhole width to match the fabric and
thread. (See page 30.)
@ BH? or 40
@ R: Automatic buttonhole foot
28