9
Setting of automatic
For the awning or blind to shade optimally, the values for automatic operation
must be adjusted to the local conditions. The following settings are queried one
after the other:
A. Lightness for the shading
B. Extension delay
C. Retraction delay
D. Indoor temperature block
E. Outdoor temperature block
F. Wind alarm
G. Rain alarm
H. Storage
This is how you access the automatic settings:
In meteorological data display, press the key for at least 3
seconds in order to access the automatic setting.
You are in the automatic settings as soon as the symbols and are shown
left in the display. You can see the first parameter (lightness) which must be set.
To Next Page
Loading...