27
6.3. Slat angle
Command (reversing) appears.
In case of blinds with slats, now open the slats in the desired angle. In case of
awnings or if slats shall not be opened, do not move the shading. Then press the
key in order to complete the setting of the shading position.
7. Saving of basic settings
At the end of basic settings, the symbol (save) asks whether the
accomplished setting shall be saved.
Press the key in order to save your entered data and to access the
meteorological data display. With , you quit the basic settings without saving.
After the basic setting, the values for the automatic functions may be set. In case
of first commissioning, please check the function of the sensors in advance (see
chapter “Sensor testing").
To Next Page
Loading...