15
F. Wind alarm
After the setting of the outdoor temperature, now provide the value for the wind
protection function.
The wind alarm protects the exterior shadings from damage. If the indicated wind
value is exceeded, the awning or blind is retracted and manual operation is
blocked.
Wind speed is indicated in m/sec (meters per second). The wind alarm is
maintained for 5 minutes. If the set wind value is exceeded within these 5
minutes, the stop time starts from the beginning.
The following table (see next chapter) serves as indication in order to set the wind
value. Depending on the position of the winter garden and the assembly position
of the weather station, different wind values may be optimal for the protection of
the shading. Observe the behaviour of the awning or blind in case of wind and
correct the wind value accordingly.
The presetting for the retraction in case of wind is 4 m/sec.
Adjust the value with (higher) and (lower) or select (off) in order to
deactivate the function. Then press in order to access the setting of the next
parameter.
To Next Page
Loading...