42
Query service data
The software version of the operating unit and the weather station may be
indicated in the display. From the basic settings you may get to the service menu
by a long pressing of (3 seconds). At first, the software version of the
operating unit ( , panel) is indicated, after the short pressing of , the
software version of the control/weather station ( , Solexa) is indicated. Display
10 means version 1.0, 12 means 1.2, etc. Quit the service data display by another
short pressing of .
Factory settings
The following presetting for the automatic is stored when the Solexa control
system is delivered:
• Shading beginning with a sun intensity of > 40 kLux
• Delay time in case of sunshine until shadings extend: 1 min,
retract: 12 min
• Blocking until indoor temperature > 18°C
• Blocking until outdoor temperature > 5°C
• Wind alarm beginning with 4 m/sec
• Rain alarm activated
Abbreviations
kLux: Kilolux (= 1000 Lux), unit of light intensity.
m/s: Metres per second, unit of wind strength
Technical data
The product conforms with the provisions of EU directives.
Operating unit
Housing: Plastic material (partly lacquered)
Colours: • White matt (similar to RAL 9016 Traffic White)
• Aluminium matt brush finished
• Pearl dark grey matt brush finished
Mounting: On-wall
Protection category: IP 40
Dimensions: approx. 103 × 98 × 28 (W × H × D, mm)
Total weight: approx. 170 g (including batteries)
Ambient temperature: Operation 0…+50°C, Storage -10…+50°C
To Next Page
Loading...