Elsner Solexa 230V - Connection Diagram for Weather Station

52 pages

Save Page as PDF

To Next Page

To Previous Page

Connection diagram for weather station

The operating unit is battery-powered. The

communication between operating unit and

weather station is accomplished by radio.

Main Page

Default Chapter2
- Table of Contents2
Description4
- Scope of Supply4
- Commissioning Procedure4
- Options for Connection and Control4
- Overview of Available Automatic Functions5
Operation6
- Key Functions and Display Symbols of the Meteorological Data Display6
- Display of Lightness and Wind Speed7
Manual Operation8
- Move Shading Manually8
- Switch between Manual and Automatic8
- Central Control8
- Settings (Default Setting, Automatic)9
Setting of Automatic10
Lightness for the Shading12
Extension Delay13
Retraction Delay13
Indoor Temperature Block14
Outdoor Temperature Block15
Wind Alarm16
Rain Alarm17
- Table for Wind Speeds17
Storage of Automatic Settings18
Basic Settings19
1 Radio Connection to the Weather Station21
- Delete All Radio Connections of the Weather Station22
2 Rotational Direction of the Motor22
3 Operating Direction23
4 Operating Command in Case of Wind or Rain Alarm24
5 Sending of Meteorological and Automatic Data25
6 Shading Position26
- Retracted Position27
- Setting of the Desired Position27
- Slat Angle28
7 Saving of Basic Settings28
Safety Instructions for Automatic and Alarm Functions29
Installation and Commissioning30
Installation of Weather Station and Connection of the Drive Mechanism31
- Position31
- Attaching the Mount32
- Preparation of the Weather Station33
- Connection of Voltage Supply and Drive Mechanism34
- Mounting of the Weather Station35
- Details for the Installation of the Weather Station36
Installation of Operating Unit36
Notes on Radio Installations36
Commissioning37
Sensor Testing38
- Sun Sensor Testing38
- Wind Sensor Testing38
- Rain Sensor Testing39
- Temperature Sensor Testing39
Service40
Service and Maintenance40
- Weather Station40
- Operating Unit40
- Insert Batteries (Operating Unit)40
- Error Messages41
- Query Service Data43
Factory Settings43
Abbreviations43
Technical Data43
- Operating Unit43
- Weather Station44
- Connection Diagram for Weather Station45
- View of Rear Side and Drill Hole Plan for the Weather Station46
- View of Rear Side and Drill Hole Plan for the Operating Unit47
- Connection Samples for Several Drive Mechanisms as Group48
- Connection Samples for Centralised Control with IMSG 23049
Personal Setting Data of the Automatic51

Elsner Solexa 230V - Connection Diagram for Weather Station

Table of Contents