Eltek Valere Flatpack2 Installation Guide

Installation Guide Flatpack2 -48V 150A ~ 2029242 R2, May 2008 15
Configurations
Configurations for the Flatpack2 -48V 150A system are defined by the number of
breaker positions provided for batteries and load equipment. The following are
common configurations:
Two Battery, Two Load (2B 2L)
The two leftmost breaker position sets are populated, and the rightmost bus
set is not installed in the “2B 2L” configuration.
Figure 8 - Recommended Return Bus Organization
Battery Returns
Load Re
turns
CO Ground
Battery A
Battery B
Load 1
Lo
ad 2
Returns
Battery
Load

Eltek Valere Flatpack2 Specifications

General

Brand	Eltek Valere
Model	Flatpack2
Category	Power Supply
Language	English