What does error text: 32 checksum error mean for my ELTEX KNH35?
The error text '32 checksum error' indicates that there is a checksum error in the error memory, meaning it is defective. Acknowledge the error. If it recurs, it indicates a memory problem, and the unit should be sent for repairs.
What does error text: 33 service data mean for my ELTEX KNH35?
The error text '33 service data' indicates an error in the service data. Acknowledge the error. If it recurs, it indicates a memory problem, and the unit should be sent for repairs.
What does error text: 11 calibration mean for my ELTEX KNH35 Portable Generator?
The error text '11 calibration' indicates defective or missing calibration data in the EEPROM. This signifies a memory problem, and the unit should be sent for repairs.
What to do if ELTEX KNH35 displays error text: 14 –12 V missing?
If your ELTEX Portable Generator displays the error text '14 –12 V missing', acknowledge the error. If it recurs, send the unit for repairs.
What to do if ELTEX KNH35 displays error text: 13 +13 V missing?
If your ELTEX Portable Generator displays the error text '13 +13 V missing', acknowledge the error. If it recurs, send the unit for repairs.
General| Brand | ELTEX |
|---|---|
| Model | KNH35 |
| Category | Portable Generator |
| Language | English |
Explains warning and caution symbols used in the manual to identify potential dangers.
Addresses requirements for contact protection against live components as per regulations.
Manufacturer's right to modify specifications and provide updated information upon request.
Defines approved applications, warranty limitations, and prohibitions on modifications.
Detailed safety instructions for maintenance, repairs, and general operation to prevent hazards.
Instructions for mounting the generator unit, ensuring proper air circulation and access.
Details on establishing a permanent and correct ground connection for safety and proper operation.
Guidelines for routing high voltage cables, including bending radius, spacing, and bore diameter calculations.
Lists compatible charging bar models and considerations for using distributor boxes.
Step-by-step method for connecting high voltage cables, emphasizing safety precautions.
Procedure for safely disconnecting high voltage cables, including necessary precautions.
Instructions for connecting the mains power supply to the generator.
Details on integrating the generator with external systems via the analog interface.
Procedure for properly laying and connecting the cable shield for interface cables.
Procedure for safely switching on the high voltage generator and initial operation.
Explanation of the menu system, operator key functions, and navigation.
Details on available functions, setting options, and default factory configurations.
Guidance on adjusting the desired output voltage or current setpoint.
Instructions for accessing and modifying operating parameters, including password entry.
Configuration options for output-specific parameters like operating mode, limits, and ramp times.
Settings that affect the entire generator, such as language and default configurations.
Accessing diagnostic information and system parameters within the service menu.
Instructions for checking the generator's proper functioning and fuse access.
Cleaning procedures for charging bars using compressed air and cleaning gasoline.
Step-by-step guide for assembling plug connectors for the analog interface.
To Next Page
