ELTEX TAU-8.IP - Page 150

150 VoIP Subscriber Gateways
<ttl> is the hop limit for a route (default: 255);
<tos> is a type-of-service tag in the udp/icmp packet to be sent (default: 0);
<icmp> enables the use of ICMP ECHO instead of UDP datagrams (disabled by default);
<port> is the number of UDP port, which is used to send UDP datagrams (default: 33434);
<size> is the full length of a traceroute packet in bytes (100 by default);
destination – destination host address.
< value > – parameter value:
for repeat: 1-8;
for timeout: 0-10;
for ttl: 1-255;
for tos: 0-63;
for port: 1-65535;
for size: 40-32768.
Privilegy
none
Command mode
EXEC
Example
tau-8> traceroute 192.168.118.46
traceroute to 192.168.118.46 (192.168.118.46), 255 hops max, 100 byte packets
1 192.168.118.46 (192.168.118.46) 1.510 ms 1.053 ms
show system
The command is intended for viewing firmware version.
Syntax
show system
Parameters
Command contains no arguments.
Privilegy
none
Command mode