ELTEX TAU-8.IP - Page 149

149 VoIP Subscriber Gateways
for payload: 0-65535;
for df-bit
do – set;
dont – don't set;
want – don't set for packets exceed MTU
for tos: 0-63;
for timeout: 1-60.
Privilegy
none
Command mode
EXEC
Example
tau-8> ping 192.168.118.46
PING 192.168.118.46 (192.168.118.46) 56(84) bytes of data.
64 bytes from 192.168.118.46: icmp_seq=1 ttl=64 time=9.31 ms
64 bytes from 192.168.118.46: icmp_seq=2 ttl=64 time=1.01 ms
64 bytes from 192.168.118.46: icmp_seq=3 ttl=64 time=1.29 ms
64 bytes from 192.168.118.46: icmp_seq=4 ttl=64 time=1.30 ms
64 bytes from 192.168.118.46: icmp_seq=5 ttl=64 time=1.34 ms
--- 192.168.118.46 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4009ms
rtt min/avg/max/mdev = 1.019/2.854/9.311/3.230 ms
traceroute
TraceRoute utility.
Syntax
tracerout [df-bit ][ repeat <value>][ timeout <value>][ ttl <value>][ tos <value>][ icmp]
[port<value>][ size <value>] destination
Parameters
df-bit – set «don't fragment bit» (not set by default);
<repeat> is the number of sent packets with unchanged “ttl” (default: 2);
<timeout> is a timeout in seconds for response to a sent udp/icmp packet (default: 2);