ELTEX TAU-8.IP - Page 154

154 VoIP Subscriber Gateways
Syntax
show voiceport status <value>
Parameters
< value > – parameter 1-8 value.
Privilegy
none
Command mode
EXEC
Example
tau-8# show voiceport status 1
Phone: 001
Status: hangup
Registration time: 0
Server registration:
show voiceport configuration
The command is intended for viewing FXS port configuration.
Syntax
show voiceport configuration <value>
Parameters
< value > – parameter 1-8 value
Privilegy
priv
Command mode
EXEC
Example
tau-8# show voiceport configuration 1
pbx.fxs1=config
pbx.fxs1.custom=0
pbx.fxs1.profile=Default
pbx.fxs1.phone=001
pbx.fxs1.username=001
pbx.fxs1.disabled=0
pbx.fxs1.minonhooktime=500
pbx.fxs1.gainr=-70
pbx.fxs1.gaint=0
...
| Press any key to continue | Press 'q' to exit |