ELTEX TAU-8.IP - Page 155

155 VoIP Subscriber Gateways
show voiceprofile
The command is intended for viewing FXS profile information.
Syntax
show voiceprofile <value>
Parameters
<value> – parameter value: 1-8
Privilegy
priv
Command mode
EXEC
Example
tau-8# show voiceprofile 1
fxs_profiles.profile0=profile
fxs_profiles.profile0.profile_name=Default
fxs_profiles.profile0.minonhooktime=500
fxs_profiles.profile0.gainr=-70
fxs_profiles.profile0.gaint=0
| Press any key to continue | Press 'q' to exit |
show switch
The command is intended for viewing Ethernet port status.
Syntax
show switch
Parameters
Command contains no arguments.
Privilegy
none
Command mode
EXEC
Example
tau-8# show switch
Link: on
Duplex: full
Speed: 100Mbps
show call active
Shows information on active calls.
Syntax
show call active