ELTEX TAU-8.IP - Page 164

164 VoIP Subscriber Gateways
devname
The command is intended for setting the device name.
Syntax
devname <value>
Parameters
<value> - string: 96 characters
Privilegy
priv
Command mode
CONFIG
Negotiation function 'no' command
Set the default device name (default: TAU-8).
Example
tau-8(config)# devname tau8_hub
sip profile 1..8
The command is intended for enter the SIP profile N configuration mode.
Syntax
sip profile 1..8
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
CONFIG
Example
tau-8(config)# sip profile 1
tau-8(config-sip-profile)#
udp rtpport sip min
Sets the minimum value of the range of UDP ports which are used to transmit RTP.
Syntax
udp rtpport sip min <value>
Parameters
<value> - number: 1024-65535
Privilegy
priv
Command mode
CONFIG
Negotiation function 'no' command
Sets the default minimum value of the range of UDP ports which are used to transmit RTP
(default: 16384).