ELTEX TAU-8.IP - Page 165

165 VoIP Subscriber Gateways
Example
tau-8(config)# udp rtpport sip min 10000
udp rtpport sip max
Sets the maximum value of the range of UDP ports which are used to transmit RTP.
Syntax
udp rtpport sip max <value>
Parameters
<value> - number: 1024-65535
Privilegy
priv
Command mode
CONFIG
Negotiation function 'no' command
Sets the default maximum value of the range of UDP ports which are used to transmit RTP
(default: 32767).
Example
tau-8(config)# udp rtpport sip max 12000
voice port 1..8
The command is intended for enter the voiceports configuration mode.
Syntax
voice port 1..8
Parameters
Command contains no arguments.
Privilegy
priv
Command mode
CONFIG
Example
tau-8(config)# voice port 1
tau-8(config-voice-port)#
voice profile 1..8
The command is intended for enter the voice profiles configuration mode.
Syntax
voice profile 1..8
Parameters
Command contains no arguments.
Privilegy
priv
Command mode