Tinyhawk III Flight Control Diagram
This flight controller has a MCU(STM32F411CEU6) with a MPU6000 gyro. Tinyhawk III flight
controller comes pre-programmed and properly tuned for optimal flight. For a full tune and
configuration setting file (CLI dump file) please visit https://emax-usa.com/ for the CLI
dump file.
Stock Flight Controller Settings
PID profile 1 is tuned and optimized for Tinyhawk III and Emax 1S HV 450 mAh for proper
flight indoors and outdoors. Please do not change these values.
This configuration has been professionally adjusted by many parties, and EMAX strongly
recommends not to change these values arbitrarily.
To Next Page
Loading...
