EasyManuals Logo

EMC Symmetrix DMX-3 User Manual

EMC Symmetrix DMX-3
326 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #186 background imageLoading...
Page #186 background image
186
EMC Symmetrix DMX-3 Product Guide
Data Integrity, Availability, and Protection
RSA enVision also provides configurable security alerts with
thresholds based on the frequency of various security-related events,
such as the following:
Denied login attempts on a host
Denied login attempts on the service processor
Attempts to escalate privileges on Solutions Enabler
Attempts to escalate privileges on the service processor
Symmetrix Access Control violations
Removal of physical drives
Successful disk erasure events
Unsuccessful disk erasure events
Start of a remote file transfer between the customer environment
and EMC Service personnel
This integration is available with RSA enVision v3.5 and either
DMX-3 or DMX-4 systems running Enginuity 5772 and higher.
EMC Certified Data
Erasure for
Symmetrix Disks
Data Erasure erases data on a physical medium where the granularity
is an entire physical drive. The erasure can vary between a single pass
write of data to the drive, all the way to multi pass erasure using
complex algorithms as used in DoD 5220.22-M. The intent of secure
disk erase is to remove all recoverable user data from a given physical
drive, or report that the attempt to remove the data was unsuccessful.
Running Data Erasure Upon purchase of the EMC Certified Data Erasure for Symmetrix
Disks licence, a configuration change will be executed by the CE at
time of installation, or at a later time, to enable this feature. The EMC
Certified Data Erasure for Symmetrix Disks licence will enable the
following functions to be performed. Data Erasure will commence on
the “Not Ready” spare automatically, as long as sufficient numbers of
permanent spares exist.
Provided the secure disk erase completes successfully, this process
will allow a single CE visit to replace a failed drive with a new drive
and return the failed drive EMC. The customer may then reference
the audit log for evidence and proof of successful Data Erasure.
Note: The EMC Certified Data Erasure for Symmetrix Disks software
requires that the customers purchase a supporting service that includes the
ability to retain drives that cannot be erased.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EMC Symmetrix DMX-3 and is the answer not in the manual?

EMC Symmetrix DMX-3 Specifications

General IconGeneral
BrandEMC
ModelSymmetrix DMX-3
CategoryStorage
LanguageEnglish

Related product manuals