46
EMC Symmetrix DMX-3 Product Guide
Symmetrix DMX-3 Hardware
Major components
The Symmetrix DMX-3 is a disk array subsystem that is composed of
a system bay and from one to eight storage bays. This section
describes the Symmetrix DMX-3 components.
To reduce the risk of personal injury, do not open the doors or move
the Symmetrix DMX-3 unless you are qualified and familiar with
safety procedures for electrical equipment and the Symmetrix
DMX-3. The Symmetrix DMX-3 contains no user-serviceable parts.
Neither the system bay nor the storage bays should not be moved or
opened for any reason by untrained persons. If the Symmetrix DMX-3
is in need of relocation or repair, only qualified personnel should
access components inside the bays or move them.
Table 6 Symmetrix DMX-3 model component overview
Symmetrix DMX-3 components Component information location
Main component locations of the system bay, front and rear views Figure 6 on page 47
Main component descriptions of the system bay Table 7 on page 48
Main component locations of the storage bay, front and rear views Figure 7 on page 49
Main component descriptions of the storage bay Table 8 on page 50
To Next Page
Loading...
