EMC Symmetrix DMX-3 Product Guide
19
Warnings and Cautions
Static precautions EMC incorporates state-of-the-art technology in its designs, including
the use of LSI and VLSI components. These chips are very susceptible
to damage caused by static discharge and need to be handled
accordingly.
Before handling printed circuit boards or other parts containing
LSI or VLSI components, observe the following precautions:
â—† Store all printed circuit boards in antistatic bags.
â—† Use a ground strap whenever you handle a printed circuit board.
â—† Unless specifically designed for nondisruptive replacement, never
plug or unplug printed circuit boards with the power on. Severe
component damage may result.
To Next Page
Loading...
Need help?
General
