DPSI BMS Operating Manual Version 1.0
Page 3 of 32
1. Preface
With the DPSI BMS (Dual Power System Interface – Battery
Monitoring System) you purchased a high quality and reliable
measuring system for battery power supplies. We thank you for your
faith in EMCOTEC GmbH and assure you that you have made the right
decision!
Years of experience in development and manufacturing of
electronic systems went into the DPSI BMS. All products are
manufactured completely in house at EMCOTEC GmbH in Germany.
In-house manufacturing, careful quality assurance and a 100% test of
all shipped systems assure you of the highest reliability and
functionality.
Please read this operating manual carefully in order to use all functions
of the DPSI BMS optimally. We wish you continued success and
enjoyment with this high quality product!
2. Features
The DPSI BMS (Dual Power System Interface – Battery Monitoring
System) is the first monitoring and displaying system for batteries of
twin power supplies for use in large model airplanes.
For operation, the DPSI BMS is simply put in between both batteries
and the already mounted battery switch. Switching on and off occurs
fully automatically as soon as current is drawn (when equipment turned
on) or no current is drawn (when equipment turned off).
The DPSI BMS displays all relevant measured values in plain text.
Besides the battery voltages and currents of the connected consumers
(minimum / average / actual / maximum values), withdrawn capacity as
well as turn on time is displayed.
To Next Page
Loading...
