DPSI BMS Operating Manual Version 1.0
Page 9 of 32
5. Optional Accessories
5.1. DPSI BMS Accessory Set
The DPSI BMS accessory set contains two connector cables, 30 cm
(11.8”) each, which are put in between the DPSI BMS and the battery
switch (1 cable for the 1 channel version). Therefore, no soldering work
is necessary if MPX connectors are already in use (from the battery to
the battery switch).
The accessory set also contains a bracket (for spare) which serves as
a lock for the MPX connectors.
To Next Page
Loading...
