DPSI BMS Operating Manual Version 1.0
Page 30 of 32
13.1. Measuring Parameters of the DPSI BMS
Technical modifications and errors excepted!
Hint:
A usual digital multi meter is considerable slower in peak value data acquisition
than the DPSI BMS, thus, very short current peaks are not recognized. The
extremely fast measurement of the DPSI BMS provides information about the
real peak values which the equipment reaches in short times.
14. Warranty
EMCOTEC shall issue a 24 month warranty on the “DPSI BMS”. The
guarantee period shall begin with delivery of the equipment by the
retailer and shall be not extended by any guarantee repair or
guarantee replacement.
During the period of guarantee, the warranty shall cover the repair or
replacement of any proven manufacturing or material defects at no
charge. There shall be no specific entitlement to repair work. In case of
a guarantee claim, the manufacturer shall reserve the right to
exchange the equipment for a product of equal value if repair of the
item is not feasible for economic reasons. There shall be no
assumption of liability for consequential damages that are brought
about by a proven defect during operation of the "DPSI BMS". There
shall be no extended claims for damages.
Voltage Display 2% / 1 Digit / Resolution 0.1V
Current Display 1% / 1 Digit / Resolution 0.01A
In Range of 0.15A to 10.00A
Capacity Display 1% / 1 Digit / Resolution 1mAh
Operating Time 1% / Resolution 1min
Sampling Rate A/D Converter 500Hz
Peak Value Data Acquisition arithmetically Average over 20msec
To Next Page
Loading...
