Emerson Daniel Series User Manual

Minimum clearances for installation, operation and
maintenance
Below is the approximate shipping dimensions and weight for the Series 1500 LTM NPS
3-24. Consult the factory for certified dimension prints.
Figure 2-3: Dimensions for the Series 1500 LTM NPS 3-24
Table 2-11: Flow meter and flow straightening section dimensions for the Series 1500
LTM NPS 3-24
Size A B C
Inches mm Inches mm Inches mm
3 10 254.0 5 127.0 11 278.6
4 12 304.8 6 152.4 12 297.7
6 14 355.6 7 177.8 13 324.7
8 16 406.4 8 203.2 14 350.1
10 20 508.0 10 254.0 15 377.1
12 24 609.6 12 304.8 16 402.5
16 32 812.8 16 406.4 17 443.7
18 36 914.4 18 457.2 18 469.1
20 40 1016 20 508 19 494.5
24 48 1219 24 610 21 545.3
Table 2-12: Flow meter and flow straightening section dimensions for the Series 1500
LTM NPS 3-24
Size D E F
Inches mm Inches mm Inches mm
3 30 762 15 381 55 1397.0
4 40 1016 20 508 72 1828.8
6 60 1524 30 762 104 2641.6
Operating conditions and specifications User manual
March 2019 P/N 3-9008-515
52 Daniel Series 1500 Liquid Turbine Meter, NPS 3-24

Emerson Daniel Series Specifications

General

Type	Flow Meter
Repeatability	±0.1% of reading
Communication Protocol	HART, Modbus, Foundation Fieldbus
Output	4-20 mA, pulse, frequency
Process Connection	Flanged, wafer, threaded
Material	Stainless steel, carbon steel, Hastelloy
Operating Temperature	-40°C to +85°C (-40°F to +185°F)
Protection Rating	IP67, NEMA 4X
Fluid Compatibility	Liquids, gases