1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10 IC200D 175/192
51.9 PROPORTIONAL OUTPUT 0..10V TO CONTROL DUMPER MOTORS
OUT1…OUT4 = signals for the modulation of the dumper motor
GND = ground
If the dumper motor has a common line between a pole of the power supply and the “–“ pole of the 0..10V
signal, it is necessary to use two transformers for the power supply of the controller Ichill and the power
supply of the dumper motor.
To Next Page
Loading...
