1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10 IC200D 6/192
3. USER INTERFACE
3.1 DISPLAY AND ICONS
ON when a temperature or pressure is visualized
Real time clock: ON when the bottom display show the RTC
ON during the programming with time based parameter value
In function menu indicates the defrost delay counting
General alarm: blinking in case of alarm
Domestic hot water: ON when domestic hot water production is active
Dynamic Set point: ON dybnamic set point or Energy saving are active
Anti freeze heaters/ integration heating / boiler: ON if the heaters are switched ON
Water flow alarm / supply fan overload (air / air unit): blinking in case of water flow alarm or
supply fan overload alarm
Water pump: ON if at least one water pump is actives or if supply fan is active
To Next Page
Loading...
Need help?
General
