1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10 IC200D 189/192
Terminals 3 and 4 allows to connect another board in parallel to control two separate fans with the same
input control.
Terminals 1 / 2 / 3 / 4 are for screw for a 2.5mm wire
Terminals 5 / 6 / F / N are 6,3mm faston
Transformer
The TF10 trasnformer models: 230/12 Vac, 230 /24 Vac, 110 / 12 Vac, 24 / 12 Vac
58.2 RT314 KIT
Relay module (DIN rail mounting) to connect a relay to an analog output.
58.3 HOT KEY:
Parameters copying key
To Next Page
Loading...
