1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10 IC200D 192/192
GENERAL RULES
Comply with the following recommendations during the installation process in order to prevent the device
from malfunctioning.
Separate the signal cables from the power cables (it is recommended to use BELDEN 8772-type
shielded cables) in order to prevent malfunction due to electromagnetic interference; do not use the
same electrical conduit to install high voltage cabling and low voltage cabling.
The ground connection of the secondary coil of the transformer that powers the device can result in
a bad performance; where possible, this connection should be avoided.
To Previous Page
Loading...
