1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10 IC200D 41/192
It is possible to read the information related to the screw compressor.
In the first visualization it is possible to read the set point of the discharge temperature and the liquid
injection set point.
To read the discharge temperature, the status of the liquid injection valve and the status of the
minimum load start up valve:
press or to select the circuit 1 or circuit 2
press to visualize the discharge temperature, the status of the liquid injection valve and
the status of the minimum load start up valve of the compressor 1
press or to visualize the information of the next compressor (if configured)
Heaters and auxiliary output
Press or to select the heaters or auxiliary output status.
To Next Page
Loading...
