[] Main Menu
Thissectiondescribestheoverviewofthe mainmenudisplayedwhenyou
press[SETUP].Formoredetails,seethereferencepageforeachitem.
Themainmenuconsistsof thefunctionsettingitemsbelow.
Press [SETUP].
EXIT
To exit settings.
PICTURE
You can adjust the picture quality.
(Refer to "Picture Adjustment" on page 21 .)
SOUND
You can adjust the sound quality.
(Refer to "Sound Adjustment" on page 22.)
CHANNEL
You can automatically scan the viewable channels and
remove the undesired channels.
(Refer to "Auto Channel Scan" on page 13.)
DETAIL
You can change the display format for closed caption,
which displays the dialogue of a TV program or other
information across the TV screen.
(Refer to "Closed Caption" on page 23.)
You can set the viewing limitations.
(Refer to "V-chip" on page 27.)
You can select the sound input for the HDMI1 input
jack if your unit is connected to an HDMI or DVl device.
(Refer to "HDMI Audio" on page 30.)
LANGUAGE
You can change the language (English, Spanish,
French) displayed on the main menu.
(Refer to "Language Selection" on page 14.)
[]Auto Channel Scan
Ifyou switchwires(e.g.,betweenantennaandCAI"V)orifyoumovethe
unitto adifferentareaafterthe initialsetting,orifyourestorethe DTV
channelyoudeleted,youwillneedto performauto channelscan.
Beforeyoubegin:
Makesureiftheunitisconnectedtoantennaorcables.
Press [SETUP] to display the main menu.
2 Use [Cursor A/V] to select "CHANNEL", then press
[ENTER].
or
3 Use [Cursor A/V] to select "Autoscan", then press
[ENTER].
or
Use [Cursor A/V] to select an appropriate option, then
press [ENTER[.
or
_J
• When aerial antenna is connected, select"Air".
• When connected to CATV, select"Cable".
• Scanning and memorizing of channels start
automatically.
iii_iiii_i
ii:_?i
ii,iiii_'_
iiiI_!_!
_iiii:iii!
• When the scanning and memorizing are completed,
the lowest memorized channel will be displayed.
EN
To Next Page
Loading...
Need help?
General
